All stock codes associated to this product
MS4055
6-Way Powerboard Overload Protection
The 6 Way Powerboard with over-current protection is equipped with a circuit breaker, which will safely shut off all power in the event of overloading. After eliminating the overload it can be reset by switching the power off and switching the power point back on.
Features:
- Ideal for computer hardware, electrical equipment and domestic appliances
- 6 Outlets
- Overload protection
- 1m cord length
Technical Data:
- Input: v 240Volt / 50Hertz
- Max: 10Amps
Operating Instructions:
Use only with a correctly wired regular power point (240 Volt Max. Load 10Amps) and ensure you have a good earth connection.
Note: This power board does not have surge protection and will not protect your equipment if lightning directly strikes the house, electrical services or antenna. The over-current protection will not offer protection if there is a sustained over voltage condition caused by a fault in the mains power distribution system.
Do not use outdoors or in wet locations and use only with a correctly wired power point. If in doubt consult a qualified electrician.