|
NetShelter SX
Features & Benefits |
|
Agility |
|
Pre-installed full-enclosure height rear accessory
channels |
|
Integrated and
adjustable rear accessory channel provides zero U mounting locations for
toolless accessories. Each channel has two mounting bays to support a
combination of up to four accessories such as PDUs and vertical cable
organizers. 1070mm (42in), 825mm (32 in), and deep enclosures and
networking enclosures include two channels. 1200mm (48in) deep enclosures
include four channels. Channels are pre-installed at the factory in the
rear of the enclosure but can be moved to other locations of the enclosure
along the side brace to resituate cable management where it is needed
most. |
|
Adjustable mounting rails with captive hardware and rapid
alignment |
|
The vertical mounting
rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any
mounting requirement for IT equipment. Easy alignment feature integrated
into the enclosure mounting rail and side brace for quick alignment
verification without the use of tools to verify alignment. U positions are
numbered front and back for rapid installation of
equipment. |
|
Enclosure assemble-to-order (ATO) options
capable |
|
The Enclosure ATO
(Assemble-to-Order) options provide a level of customization for enclosure
customers beyond the standard enclosure models. This customization is
limited to the assembly of the enclosure itself and does not include
additional enclosure mounted components. For example, the enclosure can be
assembled without sides, doors, or without sides and doors. Check apc.com
for enclosure size options and availability. |
|
Integrated joining hardware with multiple width enclosure alignment |
|
Enclosures include
pre-installed joining hardware to join enclosures in a row and provide
additional stability to the enclosure. The pre-installed joining hardware
includes holes for joining to an adjacent enclosure at 600mm centers or
24in centers depending upon the floor layout. |
|
Special packaging options for shipping rack with equipment mounted |
|
Enclosures with shock
packaging are standard enclosures with provisions in the packaging design
and enclosure assembly for shipping the enclosures with equipment mounted
inside. Check apc.com for enclosure size options and
availability. |
|
Split rear doors |
|
Split rear doors
improve access and serviceability to rear of rack mounted equipment. The
split rear doors help to maximize floor space. Only 11 inches (279 mm) of
clearance is required behind the enclosures to allow for door
swing. |
|
Low-profile castors and adjustable leveling feet from underneath or
above |
|
Enclosures are shipped
standard with both leveling feet and castors. Leveling feet can be quickly
adjusted through the use of a screwdriver or drill, eliminating the need
to reach underneath with a wrench. |
|
Safety |
|
Integrated electrical grounding |
|
The roof, side panels
and front and rear doors are grounded to the frame of the enclosure. Eight
additional electrical grounding inserts are located on the frame for
external grounding. |
|
Designed for enhanced structural stability |
|
A proven frame design,
heavy-gauge mounting rails, and heavy-duty casters provide for 3000 lb
(1364 kg) static (levelling feet) and 2250 lb (1023 kg) dynamic (castor)
load ratings. Enclosures have been tested and approved to be combined with
proper bolt down accessories to meet various seismic requirements. Check
apc.com for product documentation for specific
requirements. |
|
