All stock codes associated to this product
CT2K102464BD160B, 649528762245
DDR3L 240-pin DIMM
Desktop modules that operate at speeds up to 1600 MT/s and have a CL11
latency. It is dual voltage and can operate at 1.35V or 1.5V. It is
Unbuffered and is non-ECC. It conforms to the industry standard UDIMM
layout of 240 pins and is compatible with computers that take DDR3 UDIMM
memory.
A dual inline memory module (DIMM) consists of a number of memory
components (usually black) that are attached to a printed circuit board
(usually green). The gold pins on the bottom of the DIMM provide a
connection between the module and a socket on a larger printed circuit
board. The pins on the front and back of a DIMM are not connected to
each other.
Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules).
To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket.
The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins.
| Product Specifications
|
|---|
| Brand
|
Crucial |
| Form Factor
|
UDIMM |
| Total Capacity
|
16GB Kit (2 x 8GB) |
| Warranty
|
Limited Lifetime |
| Specs
|
DDR3 PC3-12800 - CL=11 - Unbuffered - NON-ECC - DDR3-1600 - 1.35V - 1024Meg x 64 - |
| Series
|
Crucial |
| ECC
|
NON-ECC |
| Module Qty
|
2 |
| Speed
|
1600 MT/S |
| Voltage |
1.35V |
| DIMM Type |
Unbuffered |
