IMG 1 of 1
Our Price:
$855.80
RRP:
$929.01
You Save:
$73.21
or quickly purchase this product
Backorder

Part Number:
443546
(?) Brand:
Manuf No:
VK248-AT
VK248AT
Shipping Weight:
0.65 KG (Includes product packaging)
Estimate Shipping

Enter email address to be notified when this item is available again

All stock codes associated to this product
VK248AT, VK248-AT, KVAVK248, KVA-VK248, 4719264644757

Aten VK248-AT 8-Channel Relay Expansion Box

 

Features

  • Provides 8 relay channels to expand the ATEN Control System
  • Up to eight VK248 expansion boxes can be added to a single Control Box
  • Flexible Deployment: Connects to a Control Box via an Ethernet connection
  • ID Switch pairs the VK248 with a controller to instantly configure the network settings
  • Provides DC power to power an AC relay module or other device
  • Supports Power over Ethernet (PoE) or DC power supply
  • Firmware upgradable through USB or Web interface

ROHSWeee

Overview

The VK248 8-Channel Relay Expansion Box provides an additional eight channels of relay output for a flexible expansion of the ATEN Control System. This allows users to control additional devices such as screen, projector lifts and blinds in environments where more devices are required. With the advantage of an Ethernet-based connection, the expansion box easily connects to the VK2100 Control Box via a LAN connection from a variety of locations across a network.

Package Contents

  • 1x VK248 8-Channel Relay Expansion Box
  • 1x Mounting Kit
  • 9x Terminal Blocks
  • 1x User Instructions

Specifications

Interfaces

Relay

• 8 normally open relays (8 x 2-pole terminal block)

• Contact Rating: Max 24 VDC, 2A

Ethernet

• 1 x RJ-45 Female, 10/100Base-T

• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH

• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:

IP: 192.168.0.60

Subnet Mask: 255.255.255.0

Switches

Controller ID

1 x 16-segment Switch

Expander ID

1 x 8-segment Switch

Reset Button

1 x Semi-recessed Pushbutton

USB

1 x USB Type A (Firmware upgrade only)

Power Consumption

DC5V:2.82W:24BTU

Environmental

Operating Temperature

0 – 50°C

Storage Temperature

–20 – 60°C

Humidity

0 - 80% RH, Non-Condensing

Power

Output

12 VDC, 300 mA

Physical Properties

Housing

Metal

Weight

0.65 kg ( 1.43 lb )

Dimensions (L x W x H)

20.00 x 7.58 x 4.20 cm

(7.87 x 2.98 x 1.65 in.)

No additional files, specification sheets, guides or documentation found for product.

Warranty: 24 months*

Full manufacturers warranty details are available at the manufacturers web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 3 | TM: 10 | LM: 31 | TY: 385 | T: 1783
We accept the following with No surcharge on VISA, Mastercard and Paypal!
© Techbuy Pty Ltd 2000 - 2024 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.