APC BR1200SI Back UPS Pro BR 1200VA - Sinewave, 8 Outlets

APC BR1200SI Back UPS Pro BR 1200VA, Sinewave,8 Outlets, AVR, LCD interface

Overview

• High Performance Computer and Electronics UPS for Premium Power Protection
• Includes: USB cable, User Manual

Key Features

Audible alarms

• Provides notification of changing utility powand UPS power conditionser Automatic self-test
• Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification

• Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery replacement without tools

• Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Battery-protected and surge-only outlets

• Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Boost and Trim Automatic Voltage Regulation (AVR)

• Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Building Wiring Fault Indicator

• This LED informs users of potentially dangerous wiring problems in the wall circuit.

Cold-start capable

• Provides temporary battery power when the utility power is out.

Dataline surge protection

• Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification

• Warns when a battery is not available to provide backup power.

Hot-swappable batteries

• Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

LCD graphics display

• Text and mimic diagrams that display modes of operation, system parameters and alarms.

PowerChute Personal Edition OS Compatibility

• This software supports numerous operating systems and processors.

Safety-agency approved

• Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Sine wave output

• Eliminates humming and heat generated when powering tube lights and fans

USB connectivity

• Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries

• Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Features & Benefits

Protection

• Surge only outlets
  • Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
• Dataline surge protection
  • Provides protection of connected equipment from power surges on the data lines.
• Battery and surge protected outlets
  • Back up and protect your hardware and data during power outages, surges and spikes.

Availability

• Battery failure notification
  • Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Automatic self-test
  • Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Intelligent battery management
  • Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Cold-start capable
  • Provides temporary battery power when the utility power is out.
• Transformer-block spaced outlets
  • Protect equipment with input transformer blocks without blocking access to other receptacles.
• Customizable voltage-transfer points
  • Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
• Customizable voltage sensitivity
  • Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
• Boost and Trim Automatic Voltage Regulation (AVR)
  • Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Green mode
  • Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Manageability

• USB connection
  • Use your PC to access additional power protection and management features for your UPS via a USB Port.
• LCD Status Display
  • Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
• Audible alarms
  • Provides notification of changing utility power and UPS power conditions
• Disconnected battery notification
  • Warns when a battery is not available to provide backup power.

Serviceability

• Resettable circuit breaker
  • Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
• Simple battery replacement
  • Increases UPS availability by allowing quick, easy battery replacement.

Marketing Features

• Boost Automatic Voltage Regulation (AVR)
  • Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
• Battery-protected and surge-only outlets
  • Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Safety

Safety-agency approved

• Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specifications