All stock codes associated to this product
VE814AT-AT-U, VE814ATATU
Aten VE814AT HDMI HDBaseT Transmitter with Local Output (4K@100m)
(HDBaseT Class A)
Overview
ATEN VE814AT is an HDBaseT Video Transmitter that is capable of sending HDMI
signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable.
Featuring dual synchronous outputs, the VE814AT can transmit video signal to two
remote displays and one at the local side. This HDCP 2.2-compliant transmitter
meets the HDMI Specification, including 3D, Deep Color, the maximum data rate of
(10.2 Gbps), and 4K video quality up to 100 m.
The VE814AT supports RS-232 and IR signaling pass-through, allowing you to
control the HDMI source device from the remote unit (VE814AR) while granting
access to the HDMI display device from the local unit (VE814AT). In addition, it
supports Long Reach Mode that extends HDMI signals up to 150 m, 1080p, via a
single Cat 5e/6 cable.
The VE814AT is a powerful solution for where digital signage is required,
such as bars, educational spaces, and public transportation stations, allowing
display of identical contents at different spots.
- Extends HDMI signals to one local and two remote displays up to 100 m over
a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable
- HDMI (3D, Deep Color, 4K); HDCP 2.2 compatible
- Superior video quality:
- 4K up to 100 m
- 1080p up to 150 m when in HDBaseT Long Reach Mode
- Extends Ethernet communication using the Ethernet pass-through
port*
- Supports two IR channels for simultaneous IR signal transmissions, ranged
from 30 KHz to 56 KHz
- ATEN EDID Technology -- when both transmitter and receiver sides are
connected, VE814A adopts the EDID values of the display connected to the
VE814AT for high-quality output
- RS-232 channel allows you to connect to serial terminals or serial
devices, such as touch screens and barcode scanners
- Supports wide screen format
- Built-in 8 kV/15 kV ESD protection
- Plug-and-play
- Rack-mountable
Note: The function is supported by VE814A-AT only.
Specifications
|
Video
Input |
|
Interfaces |
1
x HDMI Type A Female (Black) |
|
Impedance |
100
|
|
Max.
Distance |
3
m |
|
Video
Output |
|
Interfaces |
1
x HDMI Type A Female (Black) |
|
Impedance |
100
|
|
Max.
Distance |
3
m |
|
Video |
|
Max.
Data Rate |
10.2Gbps
(3.4Gbps per lane) |
|
Max.
Pixel Clock |
340
MHz |
|
Compliance |
HDMI
(3D, Deep Color, 4K) |
|
HDCP2.2
Compatible |
|
Consumer
Electronics Control (CEC) |
|
Max.
Resolutions / Distance |
Up
to 4K@70m (Cat 5e/6) / 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat
5e/6/6a) |
|
*4K
supported: |
|
4096
x 2160 / 3840 x 2160 @ 60Hz (4:2:0); |
|
4096
x 2160 / 3840 x 2160 @ 30Hz (4:4:4) |
|
Audio |
|
Input |
1
x HDMI Type A Female (Black) |
|
Output |
1
x HDMI Type A Female (Black) |
|
Connectors |
|
Unit
To Unit |
1
x RJ-45 Female |
|
Power |
1
x DC Jack (Black) with locking |
|
Control |
|
RS-232 |
Connector:
1 x Terminal Block, 3 pole |
|
Baud
Rate: 57600, Data Bits:8, |
|
Stop
Bits:1, no parity and flow control |
|
IR |
2
x Mini Stereo Jack Female (Black) |
|
Ethernet |
1
x RJ-45 Female |
|
Note:
The RJ-45 ports is functional for device supporting the Ethernet port
only |
|
Switches |
|
Long
Reach Mode Switch |
1
x Slide Switch - ON/OFF |
|
Firmware
Upgrade |
1
x Slide Switch - ON/OFF |
|
Power
Consumption |
DC5V:5.09W:24BTU |
|
Environmental |
|
Operating
Temperature |
0
- 40C |
|
Storage
Temperature |
-20
- 60C |
|
Humidity |
0
- 80% RH, Non-Condensing |
|
Physical
Properties |
|
Housing |
Metal |
|
Weight |
0.45
kg ( 0.99 lb ) |
|
Dimensions
(L x W x H) with bracket |
14.02
x 12.30 x 3.00 cm |
|
(5.52
x 4.84 x 1.18 in.) |
|
Dimensions
(L x W x H) without bracket |
13.60
x 10.10 x 2.90 cm |
|
(5.35
x 3.98 x 1.14 in.) |
|
Note |
The
VE814AT-AT supports Ethernet function and the VE814AT-ATA does
not. |
