CPU |
1.
AMD Socket AM5, support for: AMD Ryzen 7000 Series
Processors |
|
(Please
refer "CPU Support List" for more
information.) |
Chipset |
1.
AMD B650 |
Memory |
1.
Support for DDR5 6666(OC) / 6600(OC) / 6400(OC) / 6200(OC) / 6000(OC) /
5600(OC) / 5200 / 4800 / 4400 MT/s memory
modules |
|
2.
4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)
of system memory |
|
3.
Dual channel memory architecture |
|
4.
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
modules |
|
5.
Support for AMD EXtended Profiles for Overclocking (AMD EXPO) and Extreme
Memory Profile (XMP) memory module |
|
(Please
refer "Memory Support List" for more
information.) |
Onboard
Graphics |
Integrated
Graphics Processor: |
|
1.
1 x DisplayPort, supporting a maximum resolution of 3840x2160@144
Hz |
|
*
Support for DisplayPort 1.4 version and HDR. |
|
2.
1 x HDMI port, supporting a maximum resolution of 4096x2160@60
Hz |
|
*
Support for HDMI 2.1 version and HDCP 2.3. |
|
**
Support native HDMI 2.1 TMDS compatible ports. |
|
(Graphics
specifications may vary depending on CPU
support.) |
Audio |
1.
Realtek Audio CODEC |
|
2.
High Definition Audio |
|
3.
2/4/5.1/7.1-channel |
|
*
You can change the functionality of an audio jack using the audio
software. To configure 7.1-channel audio, access the audio software for
audio settings. |
LAN |
1.
Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100
Mbps) |
Wireless
Communication module |
AMD
Wi-Fi 6E RZ616 (MT7922A22M) (For PCB rev. 1.0) |
|
1.
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency
bands |
|
2.
BLUETOOTH 5.2 |
|
3.
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data
rate |
|
Intel Wi-Fi
6E AX210 (For PCB rev. 1.1) |
|
1.
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency
bands |
|
2.
BLUETOOTH 5.3 |
|
3.
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data
rate |
|
(Actual
data rate may vary depending on environment and
equipment.) |
Expansion
Slots |
CPU: |
|
1.
1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16
(PCIEX16) |
|
*
For optimum performance, if only one PCI Express graphics card is to be
installed, be sure to install it in the PCIEX16
slot. |
|
Chipset: |
|
1.
2 x PCI Express x16 slots, supporting PCIe 3.0 and running at x1
(PCIEX1_1/2) |
Storage
Interface |
CPU: |
|
1.
1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 SSD
support) (M2A_CPU) |
|
*
Actual support may vary by CPU. |
|
2.
1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 4.0 x4/x2 SSD
support) (M2B_CPU) |
|
Chipset: |
|
1.
1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 4.0 x4/x2 SSD
support) (M2C_SB) |
|
2.
4 x SATA 6Gb/s connectors |
|
RAID
0, RAID 1, and RAID 10 support for NVMe SSD storage
devices |
|
RAID
0, RAID 1, and RAID 10 support for SATA storage
devices |
USB |
CPU: |
|
1.
1 x USB Type-C port on the back panel, with USB 3.2 Gen 2
support |
|
2.
2 x USB 3.2 Gen 2 Type-A ports (red) on the back
panel |
|
CPU
+ USB 2.0 Hub: |
|
1.
4 x USB 2.0/1.1 ports on the back panel |
|
Chipset: |
|
1.
1 x USB Type-C port with USB 3.2 Gen 2x2 support, available through
the internal USB header |
|
2.
3 x USB 3.2 Gen 1 ports (1 port on the back panel, 2 ports available
through the internal USB header) |
|
3.
4 x USB 2.0/1.1 ports available through the internal USB
headers |
|
Chipset+USB
3.2 Gen 1 Hub: |
|
1.
4 x USB 3.2 Gen 1 ports on the back panel |
Internal
I/O Connectors |
1.
1 x 24-pin ATX main power connector |
|
2.
1 x 8-pin ATX 12V power connector |
|
3.
1 x 4-pin ATX 12V power connector |
|
4.
1 x CPU fan header |
|
5.
1 x water cooling CPU fan header |
|
6.
3 x system fan headers |
|
7.
1 x system fan/water cooling pump header |
|
8.
2 x addressable LED strip headers |
|
9.
2 x RGB LED strip headers |
|
10.
1 x CPU cooler LED strip/RGB LED strip header |
|
11.
3 x M.2 Socket 3 connectors |
|
12.
4 x SATA 6Gb/s connectors |
|
13.
1 x front panel header |
|
14.
1 x front panel audio header |
|
15.
1 x USB Type-C header, with USB 3.2 Gen 2x2
support |
|
16.
1 x USB 3.2 Gen 1 header |
|
17.
2 x USB 2.0/1.1 headers |
|
18.
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only) |
|
19.
1 x reset button |
|
20.
1 x reset jumper |
|
21.
1 x Clear CMOS jumper |
Back
Panel Connectors |
1.
1 x Q-Flash Plus button |
|
2.
2 x SMA antenna connectors (2T2R) |
|
3.
1 x DisplayPort |
|
4.
1 x HDMI port |
|
5.
1 x USB Type-C port, with USB 3.2 Gen 2
support |
|
6.
2 x USB 3.2 Gen 2 Type-A ports (red) |
|
7.
5 x USB 3.2 Gen 1 ports |
|
8.
4 x USB 2.0/1.1 ports |
|
9.
1 x RJ-45 port |
|
10.
3 x audio jacks |
I/O
Controller |
1.
iTE I/O Controller Chip |
H/W
Monitoring |
1.
Voltage detection |
|
2.
Temperature detection |
|
3.
Fan speed detection |
|
4.
Water cooling flow rate detection |
|
5.
Fan fail warning |
|
6.
Fan speed control |
|
*
Whether the fan (pump) speed control function is supported will depend on
the fan (pump) you install. |
BIOS |
1.
1 x 256 Mbit flash |
|
2.
Use of licensed AMI UEFI BIOS |
|
3.
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI
5.0 |
Unique
Features |
1.
Support for GIGABYTE Control Center (GCC) |
|
*
Available applications in GCC may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard
specifications. |
|
2.
Support for Q-Flash |
|
3.
Support for Q-Flash Plus |
Bundled
Software |
1.
Norton Internet Security (OEM version) |
|
2.
LAN bandwidth management software |
Operating
System |
1.
Support for Windows 11 64-bit |
|
2.
Support for Windows 10 64-bit |
Form
Factor |
1.
ATX Form Factor; 30.5cm x
24.4cm |