|
CPU |
1.
AMD Socket AM5, support for : AMD Ryzen 7000 Series
Processors |
|
(Please
refer "CPU Support List" for more
information.) |
|
Chipset |
1.
AMD X670 |
|
Memory |
1.
Support for DDR5 6666(OC) / 6600(OC) / 6400(OC) / 6200(OC) / 6000(OC) /
5600(OC) / 5200 / 4800 / 4400 MT/s memory
modules |
|
2.
4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)
of system memory |
|
3.
Dual channel memory architecture |
|
4.
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
modules |
|
5.
Support for AMD EXtended Profiles for Overclocking (AMD EXPO) and Extreme
Memory Profile (XMP) memory module |
|
(Please
refer "Memory Support List" for more
information.) |
|
Onboard
Graphics |
Integrated
Graphics Processor: |
|
1.
1 x DisplayPort, supporting a maximum resolution of 3840x2160@144
Hz |
|
*
Support for DisplayPort 1.4 version and HDR. |
|
2.
1 x USB Type-C port, supporting USB 3.2 Gen 2 and DisplayPort video
outputs and a maximum resolution of 3840x2160@144
Hz |
|
*
Support for DisplayPort 1.4 version and HDR. |
|
3.
1 x HDMI port, supporting a maximum resolution of 4096x2160@60
Hz |
|
*
Support for HDMI 2.1 version and HDCP 2.3. |
|
**
Support native HDMI 2.1 TMDS compatible ports. |
|
(Graphics
specifications may vary depending on CPU
support.) |
|
Audio |
1.
Realtek ALC1220-VB CODEC |
|
*
The back panel line out jack supports DSD
audio. |
|
2.
Support for DTS:X Ultra |
|
3.
High Definition Audio |
|
4.
2/4/5.1/7.1-channel output |
|
*
You can change the functionality of an audio jack using the audio
software. To configure |
|
7.1-channel
audio, access the audio software for audio
settings. |
|
5.
Support for S/PDIF Out |
|
LAN |
1.
Intel 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100
Mbps) |
|
Wireless
Communication module |
Intel Wi-Fi
6E AX210 |
|
1.
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency
bands |
|
2.
BLUETOOTH 5.3 |
|
3.
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data
rate |
|
(Actual
data rate may vary depending on environment and
equipment.) |
|
Expansion
Slots |
CPU: |
|
1.
1 x PCI Express x16 slot, supporting PCIe 5.0* and running at x16
(PCIEX16) |
|
*
Actual support may vary by CPU. |
|
*
For optimum performance, if only one PCI Express graphics card is to be
installed, be sure to install it in the PCIEX16
slot. |
|
Chipset: |
|
1.
1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4
(PCIEX4) |
|
2.
1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x2
(PCIEX2) |
|
*
The PCIEX2 slot shares bandwidth with the SATA3 4/5 connectors. The SATA3
4/5 connectors will become unavailable when a device is installed in the
PCIEX2 slot. |
|
Support
for AMD CrossFire technology (PCIEX16 and
PCIEX4) |
|
Storage
Interface |
CPU: |
|
1.
1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 SSD
support) (M2A_CPU) |
|
*
Actual support may vary by CPU. |
|
2.
1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 5.0* x4/x2 SSD
support) (M2B_CPU) |
|
*
Actual support may vary by CPU. |
|
Chipset: |
|
1.
2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD
support) (M2C_SB, M2D_SB) |
|
2.
6 x SATA 6Gb/s connectors |
|
RAID
0, RAID 1, and RAID 10 support for NVMe SSD storage
devices |
|
RAID
0, RAID 1, and RAID 10 support for SATA storage
devices |
|
USB |
CPU: |
|
1.
1 x USB Type-C port on the back panel, with USB 3.2 Gen 2
support |
|
2.
2 x USB 3.2 Gen 2 Type-A ports (red) on the back
panel |
|
CPU
+ USB 2.0 Hub: |
|
1.
2 x USB 2.0/1.1 ports on the back panel |
|
Chipset: |
|
1.
2 x USB Type-C ports, with USB 3.2 Gen 2x2 support (1 port on the
back panel, 1 port available through the internal USB
header) |
|
2.
2 x USB 3.2 Gen 2 Type-A ports (red) on the back
panel |
|
3.
4 x USB 3.2 Gen 1 ports available through the internal USB
headers |
|
4.
4 x USB 2.0/1.1 ports available through the internal USB
headers |
|
Chipset+USB
3.2 Gen 1 Hub: |
|
1.
4 x USB 3.2 Gen 1 ports on the back panel |
|
Internal
I/O Connectors |
1.
1 x 24-pin ATX main power connector |
|
2.
2 x 8-pin ATX 12V power connectors |
|
3.
1 x CPU fan header |
|
4.
1 x water cooling CPU fan header |
|
5.
4 x system fan headers |
|
6.
4 x system fan/water cooling pump headers |
|
7.
2 x addressable LED strip headers |
|
8.
2 x RGB LED strip headers |
|
9.
1 x CPU cooler LED strip/RGB LED strip header |
|
10.
4 x M.2 Socket 3 connectors |
|
11.
6 x SATA 6Gb/s connectors |
|
12.
1 x front panel header |
|
13.
1 x front panel audio header |
|
14.
1 x USB Type-C header, with USB 3.2 Gen 2x2
support |
|
15.
2 x USB 3.2 Gen 1 headers |
|
16.
2 x USB 2.0/1.1 headers |
|
17.
1 x noise detection header |
|
18.
1 x THB_U4 add-in card connector |
|
19.
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only) |
|
20.
1 x power button |
|
21.
1 x reset button |
|
22.
1 x reset jumper |
|
23.
1 x Clear CMOS jumper |
|
24.
2 x temperature sensor headers |
|
25.
Voltage Measurement Points |
|
Back
Panel Connectors |
1.
1 x Q-Flash Plus button |
|
2.
2 x SMA antenna connectors (2T2R) |
|
3.
1 x DisplayPort |
|
4.
1 x HDMI port |
|
5.
1 x USB Type-C port (DisplayPort), with USB 3.2 Gen 2
support |
|
6.
1 x USB Type-C port, with USB 3.2 Gen 2x2
support |
|
7.
4 x USB 3.2 Gen 2 Type-A ports (red) |
|
8.
4 x USB 3.2 Gen 1 ports |
|
9.
2 x USB 2.0/1.1 ports |
|
10.
1 x RJ-45 port |
|
11.
1 x optical S/PDIF Out connector |
|
12.
2 x audio jacks |
|
I/O
Controller |
1.
iTE I/O Controller Chip |
|
H/W
Monitoring |
1.
Voltage detection |
|
2.
Temperature detection |
|
3.
Fan speed detection |
|
4.
Water cooling flow rate detection |
|
5.
Fan fail warning |
|
6.
Fan speed control |
|
*
Whether the fan (pump) speed control function is supported will depend on
the fan(pump) you install. |
|
7.
Noise detection |
|
BIOS |
1.
1 x 256 Mbit flash |
|
2.
Use of licensed AMI UEFI BIOS |
|
3.
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI
5.0 |
|
Unique
Features |
1.
Support for GIGABYTE Control Center (GCC) |
|
*
Available applications in GCC may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard
specifications. |
|
2.
Support for Q-Flash |
|
3.
Support for Q-Flash Plus |
|
4.
Support for Smart Backup |
|
Bundled
Software |
1.
Norton Internet Security (OEM version) |
|
2.
LAN bandwidth management software |
|
Operating
System |
1.
Support for Windows 11 64-bit |
|
2.
Support for Windows 10 64-bit |
|
Form
Factor |
1.
E-ATX Form Factor; 30.5cm x
26.9cm |
